Wenglor Turkey: Level, Flow, Pressure and Temperature Sensors
Wenglor level, flow, pressure and temperature sensors in Turkey through Mikron: stainless steel housing, integrated display, M12 connection. Sales, commissioning and calibration.
For process sensors in Wenglor Turkey, you work with Mikron Proses: Wenglor’s level, flow, pressure and temperature sensors are selected by Mikron as the main seller and integrator of fluid sensors, then commissioned, calibrated and serviced. Each of the four product groups is described with its models, ranges and datasheet details:
- Level: Wenglor level sensors with the LevelTech FXPL fill-level sensor model table (including FXPL001), plus ultrasonic and hydrostatic options. See the Mikron product catalogue for the level sensor pages.
- Flow: Wenglor weFlux² and UniFlow flow sensors, calorimetric principle. For flow switches and the velocity-to-flow conversion see the flow sensor guide.
- Pressure: Wenglor UniBar pressure sensors, a pressure sensor with display that also works as a pressure switch.
- Temperature: Wenglor UniTemp temperature sensors. For Pt100 and other temperature sensors see the Pt100 resistance table and converter.
The Wenglor product families share the same design language: integrated display, programmable switching points, M12 connection and 1.4404 / 1.4435 stainless steel on surfaces in contact with the media. This allows the level, pressure, temperature and flow monitoring of a line to be set up with the same installation and commissioning logic. Pharmaceutical and food filling lines, CIP/SIP cleaning cycles, cooling water circuits, pump dry-running protection and filter fouling monitoring are the applications we most frequently install.
If you share your process conditions (fluid, pressure, temperature, connection size), we will prepare the appropriate model and quotation.
Frequently Asked Questions about Wenglor
Common questions about Wenglor products and Mikron Proses services.
Who is the main seller of Wenglor fluid sensors?
Mikron Proses Kimyasal ve Mühendislik Çözümleri A.Ş. is the main seller and integrator of Wenglor process sensors (pressure, temperature, flow) in fluid sensors. It provides model selection, sales, commissioning and calibration services under one roof.
What measurement ranges do Wenglor sensors cover?
UniBar pressure sensors measure -1...600 bar (depending on the model) in liquids and gases, while UniTemp temperature sensors measure in the 0...140 °C range with ±1 °C accuracy. weFlux² and UniFlow series calorimetric flow sensors monitor flow rate and temperature with a single sensor. The full model-based table is available in the datasheet on each product page.
Can Wenglor sensors be used in hygienic (CIP) lines?
Yes. Surfaces in contact with the media are 1.4404 / 1.4435 stainless steel; a CIP-compatible housing option is available for UniBar, and the UniTemp and weFlux² series are used for temperature and flow verification in CIP/SIP cleaning cycles.
What connection and communication options are available?
Standard M12 electrical connection and G 1/2" process connection; switching output and analog output (0...10 V / 4...20 mA) options. The weFlux² series has an IO-Link 1.1 interface.
Request a quote for Wenglor
Tell us about your application; we will come back with model selection and a quotation.