Nuvonic UVpro Air Disinfection Series: Duct, Cooler and Room UVC Modules

Overview

UVpro is Nuvonic's (Hanovia) compact UVC module family for duct, cooling unit and open-area air disinfection in industrial facilities. The air devices fall into four main groups: duct modules, cooler and evaporator modules, ventilated air treatment units and open wall or ceiling irradiators. Flange modules (FM), storage tank modules (FMT/FMDT) and monitoring and measuring devices complete the range. All have stainless steel housings, are CE/EMC compliant and have a 12,000-hour lamp replacement interval.

The developer of the UVpro series, Nuvonic (formerly Orca GmbH, renamed NUVONIC GmbH in 2023), has built the series since 2014. Mikron Proses provides the product range as a Turkish catalogue (PDF) (20 pages, MK-KAT-NUV-26-001 Rev 00).

UVpro Air Models at a Glance

KM: Supply and Exhaust Duct Modules

UVpro KM 40 and KM 50 are fitted into supply and exhaust ventilation ducts for first installation or retrofit. The number of devices required is calculated against the air flow with software support. KM 40 offers three lamp options (K(T)20-4, K(T)30-4, K(T)40-4) with 42-82 W input and 14-32 W UVC output; KM 50 uses a single lamp type (K(T)50-4) with 100 W input and 34 W UVC output.

LBD / LKEB / LKV: Cooler and Evaporator Modules

These three modules are intended to prevent biofilm formation on the cooling fins of industrial air coolers and evaporators. LBD 40 (rotating reflector, IP68, -10...+20 °C) is mounted on the ceiling or wall, or directly inside an air cooler, and suits wet and foam cleaning. LKEB is offered as a quick installation kit for air coolers (LKEB 30/40, 62-82 W, IP68). LKV is mounted at the evaporator inlet, irradiates the cooling fins evenly, lets condensate flow unobstructed and increases cooling capacity (400 mA, IP68).

V Series: Ventilated Air Treatment Units

The V series scales with room volume as stand-alone ventilated units: V-Lab (0-100 m³/h, 80 W, wall mounted, low noise level of 1-31 dB for laboratories, clinics and tasting rooms), V50/V50-E (50 m³/h, 35 W, small laboratories and practices), V300 (250 m³/h, 92 W, production and maturation rooms), V500 (250/450 m³/h in two steps, 174 W) and V1000 (250-800 m³/h adjustable, 296 W, the highest capacity model, chain-hung mounting).

WDO / WDS: Open Wall and Ceiling Irradiators

UVpro WDO and WDS are open-type UVC irradiators used only in unoccupied areas; installation with a presence sensor or door switch is recommended. WDO irradiates at 270° and suits ceiling, wall or suspended mounting, with normal (N) or thermo (K) lamp options in 20/30/40 W steps. WDS has a 360° rotating visual shield reflector that hides the irradiation during working hours; outside working hours (for example at night) the reflector is turned so the whole room and its surfaces can be disinfected. Aluminium or PTFE reflector options (for humid areas) are available, with 24 V DC (WDS 24V) or 220-240 V AC (WDS) supply.

FM and FMT / FMDT: Flange and Storage Tank Modules

FM flange modules come in mono (single tube) and duo (double tube) versions for air ducts, storage tanks, pools and in-plant applications, either at first installation or retrofit; they are mounted from the outside and are an alternative to the KM module in ducts that are hard to reach. FM 40 offers three tube options with 21/31/41 W (mono) or 42/62/82 W (duo) input; FM 50 offers 50 W (mono) or 100 W (duo). Protection class is IP68, operating temperature 0...+40 °C, and the body is stainless steel, with an optional V4A 1.4404 (316L) steel for FM 40.

FMT / FMDT UV-C disinfectors are designed for the air and inner surfaces of storage tanks. The tubes are flange-mounted to the tank and extend inside, disinfecting the air drawn in and the inner walls. The supplied monitoring unit gives an alarm through a potential-free contact for failure or tube breakage, and PTFE-coated tubes provide breakage protection for HACCP and IFS requirements. Supply is 220-240 V AC, 50-60 Hz.

Monitoring and Measuring Devices

• UVC-Line module (DM 2081): monitors current, operating hours and ignition count of 8 tube circuits in UV-C installations; RS 485 bus, potential-free signal contact and optional UV-C power sensor input. Measuring range 0...1,200 mA AC, 24 V DC supply, IP20.
• CU-1: a compact current monitoring module that alarms when operating current falls below a threshold; the threshold is factory-set in the 50...2,000 mA range; DIN rail mounted, IP20.
• UVC Safe: measures biologically weighted UV-C irradiance around 254 nm in the workplace based on Directive 2006/25/EC and determines the maximum permitted exposure time for skin and eyes (1 minute to 24 hours); connects to an Android device via mini USB.
• UVC Lampchecker: measures UV-C tube output, shows performance as a percentage and shows whether the tube needs replacing; for low-pressure UV-C lamp measurement only.

Common Specifications

How Mikron Proses Helps

Which UVpro air module (duct, cooler or open-area type) suits your facility depends on air volume, duct size and whether the area is accessible to people. Mikron Proses supplies Nuvonic UVpro air disinfection systems and original UVC tubes in Turkey, with room and duct project sizing, supply, installation and commissioning. Describe your need and we will select the model together. For the other UV product groups, see UV systems and the Nuvonic brand page; for the surface series, see UVpro surface disinfection.

Documents

• Turkish catalogue (PDF) (MK-KAT-NUV-26-001 Rev 00, 20 pages)
• UVpro KM 40 datasheet · KM 50 · LBD 40 · LKEB · LKV
• V-Lab · V50 · V50 E · V300 · V500 · V1000
• WDO · WDS · WDS 24V · FM 40 · FM 50 · FMT
• UVC-Line (DM 2081) · CU-1 · UVC Safe · UVC Lampchecker

Datasheets are the manufacturer's documents; the catalogue is in Turkish.