Skip to main content
Üsküdar / İstanbul
Nuvonic

Nuvonic PharmaLine ECO Pharmaceutical UV System

Nuvonic PharmaLine ECO is a compact UV disinfection system for pharmaceutical and healthcare process water: 3.4-116 m³/h, 316L chamber, below 0.5 µm Ra, CE and UL.

Send us your requirement

Nuvonic PharmaLine ECO Pharmaceutical UV System — describe your application and we will help you identify the right model and configuration together.

Technical specifications

Nuvonic PharmaLine ECO UV chamber: a horizontal stainless steel tube with flanged ports and a blue lamp end housing
Flow range3.4-116 m³/h (Pharmaline ECO 4 to ECO 125)
Maximum power range90-1,080 W
Lamp type and lifeLow pressure amalgam, 9,000 hours expected lamp life
Chamber materialStainless steel 316L / 1.4404
Internal finishBelow 0.5 µm Ra, welds ground out (0.38 µm Ra optional)
Working fluid temperature5°C to 40°C
Maximum CIP temperature95°C with the cabinet electrically isolated
CertificationsCE marked, UL

Nuvonic (formerly Hanovia) PharmaLine ECO is a hygienic UV disinfection system for pharmaceutical and biotechnology water lines. The ECO 4 to ECO 125 models cover 3.4 to 116 m³/h, with 90-1,080 W of low pressure amalgam lamp power and about 9,000 hours of expected lamp life. The chamber is 316L (1.4404) stainless steel with an internal finish below 0.5 µm Ra (0.38 µm Ra optional), and the system is CE marked and UL listed. With the cabinet electrically isolated it allows CIP sanitisation up to 95°C (source: Nuvonic PharmaLine ECO datasheet). Mikron Proses (Üsküdar, Istanbul), the Nuvonic distributor in Turkey, supplies the system with installation and commissioning.

PharmaLine ECO is built for pharmaceutical and healthcare process water and is described as compact enough to fit into limited space. A UV intensity monitor measures the active wavelengths, so performance is verified continuously and a low intensity alarm is built in. The wetted parts are made of FDA-approved materials, and the chamber has tri-clamp connections. The compact design can be retrofitted to an existing process.

PharmaLine ECO models

ModelFlow (m³/h)Maximum power (W)Lamps
ECO 43.4901
ECO 891501
ECO 1516.52501
ECO 3230.53601
ECO 40343801
ECO 85687502
ECO 1251161,0803

Flow values are the manufacturer’s disinfection capacity at a stated reference dose and UV transmittance, at end of lamp life, and may differ with flange connections (datasheet footnote). For any other dose or UVT the flow has to be recalculated.

Where it is used in the process

In a purified water system the unit can be placed after reverse osmosis and EDI, in the storage and distribution loop, and at the potable water supply inlet as a microbiological barrier. The point-of-use distribution line is protected in the same way.

Choosing a model

The model depends on the required flow, the UV transmittance of the water and the disinfection target; Mikron Proses can go through these with you. For the selection data, see UV system selection: flow, UVT and dose.

Applications

  • Disinfection in purified water (PW) generation and distribution lines
  • Protecting process water after reverse osmosis (RO) and EDI
  • Microbiological barrier at the potable water supply inlet
  • Protecting point-of-use distribution lines

Send us your requirement for Nuvonic PharmaLine ECO Pharmaceutical UV System

Describe your application; we will help you identify the right model and configuration.

Call Quote