Skip to main content
Üsküdar / İstanbul
Nuvonic

UVpro TS Submersible Water Disinfection Series

Nuvonic UVpro TS, TS 40 24V and TS-D are fully submersible (IP68) UVC radiators for water tanks, humidifiers, air washers and cooling towers, protecting process water and tank surfaces against biofilm.

Send us your requirement

UVpro TS Submersible Water Disinfection Series — describe your application and we will help you identify the right model and configuration together.

Technical specifications

Close-up of UVpro immersion UVC radiators with glowing lamp tubes and a stainless steel screw joint
UVpro TS 40 power21-41 W input power with three lamp options (K20-4, K30-4, K40-4); 7-16 W total UVC output at 253.7 nm
UVpro TS 40 24VSame three lamp options and UVC output; supplied directly with 24 VDC (voltage range 20-28 VDC); lamp current 1170, 1580 or 2000 mA
UVpro TS 40Supply voltage 220-240 VAC, 50-60 Hz; lamp current 110, 145 or 195 mA
UVpro TS-DTwin-lamp model with 2 x UVpro K40-4 lamps: 2 x 41 W input power, 2 x 16 W UVC output; weight approx. 4.5 kg
Protection classIP68, suitable for complete immersion
MaterialStainless steel WN 1.4301 and WN 1.4305
Operating temperature+2 to +40 °C
Lamp replacement interval12,000 hours (75% ±5% output performance)
Electronics life expectancyMore than 10 years
Cable and connection10 m cable (length customisable); screw joint, wrench size 34 mm
ConformityEMC, CE, IP68

Nuvonic UVpro TS and TS-D are immersion UVC radiators for water tanks, process water reservoirs and air washer water reservoirs. They are installed directly in the reservoir, so they treat the process water and also prevent biofilm formation in the tank and on exposed surfaces. The IP68 protection class makes them suitable for complete immersion. Mikron Proses, the Nuvonic distributor in Turkey, provides application consulting for sizing, supply, installation and commissioning.

The UVpro range has been manufactured since 2014. Its developer, Orca GmbH, took the name NUVONIC GmbH in 2023.

TS 40 and TS 40 24V: single lamp, two supply options

TS 40 and TS 40 24V use the same three lamp options (UVpro K20-4, K30-4, K40-4; 21-41 W input power, 7-16 W UVC output) and differ only in supply voltage. The TS 40 runs on 220-240 VAC mains, while the TS 40 24V is supplied directly with 24 VDC (20-28 VDC), which simplifies integration into systems that a PLC or control panel powers at low voltage. Both are fitted with a screw joint (34 mm wrench size), so they can be installed or removed easily and retrofitted to existing tanks. Device weight is 3.0-3.13 kg and the operating temperature is +2 to +40 °C. A silicone-free version and cable lengths other than 10 m are available as options.

TS-D: twin-lamp model

TS-D is a twin-lamp variant of the same family with 2 x UVpro K40-4 lamps (2 x 41 W input power, 2 x 16 W UVC output), designed for the same tank, humidifier, air washer and cooling tower applications. For flanged modules aimed at tank air and interior surfaces rather than immersion in water, see the UVpro air disinfection range and the UVpro surface disinfection range.

Choosing a UVpro TS model

Which UVpro TS model (single or twin lamp, AC or DC supply) suits your installation depends on the tank volume, the available supply voltage and the required UVC output. Mikron Proses can review these together with you. For the selection logic, see the UV system selection guide; for maintenance, see UV lamp replacement. The whole range is listed under UV systems and on the Nuvonic brand page.

Applications

  • Immersion disinfection in water tanks and reservoirs
  • Biofilm prevention in humidifier and air washer water reservoirs
  • Process water protection in cooling tower basins
  • Keeping tank interior surfaces and exposed surfaces microbiologically controlled
  • Cooling and brine baths, grey water cisterns and similar water storage systems

Send us your requirement for UVpro TS Submersible Water Disinfection Series

Describe your application; we will help you identify the right model and configuration.

Call Quote